Foam Roofing · Phoenix, AZ
Foam Roofing That Keeps Phoenix Heat Out
We've installed SPF foam systems across Arcadia, McCormick Ranch, and Scottsdale since 2016. One seamless coat — no seams, no leaks, lower cooling bills. Licensed #ROC-284731.
What’s Included
Complete Foam Roofing Package
We handle every step—surface prep, spray application, and topcoat—using GAF and CertainTeed materials. Our insured crews serve Arcadia, McCormick Ranch, and all of Phoenix since 2016.
- Free on-site inspection and estimate — same-day response
- Surface preparation: cleaning, repairs, and primer application
- Spray polyurethane foam (SPF) applied to manufacturer specs
- Reflective acrylic or silicone topcoat for UV protection
- Seamless, monolithic membrane — no fasteners or seams to leak
- Choice of foam thickness (1/2" to 2") based on your insulation needs
- GAF, CertainTeed, or Owens Corning coating options
- Full insurance claims assistance — we handle the paperwork
- 5-year workmanship warranty and manufacturer material warranties
- Licensed, bonded, and insured — Arizona ROC #284731
- GAF Certified Installer and CertainTeed SELECT ShingleMaster
- Post-installation cleanup and debris removal
Our Process
Foam Roofing: From First Call to Lasting Protection
We’ve applied spray polyurethane foam across the Valley since 2016 — from Dobson Ranch to Arcadia. Every job follows the same careful sequence. Here’s how we turn your roof into a seamless, energy-saving shield.
- 1. Same-Day Inspection & Estimate
We arrive within hours of your call, assess your existing roof, and measure the entire surface. We explain the foam system, answer all questions, and provide a written estimate before we leave. No pressure, no surprises. - 2. Surface Preparation & Repair
We power-wash the roof, remove loose debris, and patch any damaged areas. All flashings, vents, and drains are checked and sealed. Proper prep ensures the foam bonds perfectly — we even grind high spots for a flat surface. - 3. Spray Foam Application
Using a GAF-approved or GPS foam system, we spray a continuous layer of closed-cell SPF directly onto the roof deck. Thickness is carefully controlled (typically 1–2 inches), and we mask all windows, walls, and vents to keep overspray away. - 4. Top Coat & Cure
We apply a UV-resistant silicone or acrylic coating over the foam within 24 hours. This creates a seamless, watertight membrane that reflects sunlight. Full cure takes 24–48 hours — we keep the roof closed until it’s ready. - 5. Final Walkthrough & Warranty
We inspect every inch, take photos, and walk the roof with you if desired. You receive a manufacturer-backed warranty (often 10+ years) and our lifetime workmanship guarantee on all foam installations.
DIY vs. Cheap vs. Us
Why Phoenix Homeowners Choose Phoenix Roof Master
We've re-roofed jobs that started as weekend DIY projects or low-bid installs. Here's what you're actually comparing when you weigh your options.
| Factor | DIY | Discount Contractor | Phoenix Roof Master |
|---|---|---|---|
| AZ License | None | Varies | #ROC-284731 |
| Foam Materials | Retail-grade | Unknown source | Commercial SPF + elastomeric topcoat |
| Warranty | None | Contractor only | Manufacturer-backed |
| Insurance | Homeowner bears risk | Often unverified | GL + workers' comp |
| Energy Savings | Unpredictable | Unpredictable | Up to 18% cooling reduction |
| Experience | First time | Unknown | 10 years, Valley-wide since 2016 |
Real Job, Real Numbers
Scottsdale Flat Roof Foam Install — 18% Cooling Savings
Last summer we recoated a 2,400 sq ft flat roof in McCormick Ranch using Lapolla two-component SPF foam. The homeowner tracked their APS bills before and after.
Location: McCormick Ranch, Scottsdale, AZ Year: 2024 Roof type: Low-slope flat, 2,400 sq ft Materials: Lapolla FOAM-LOK 2.0 lb closed-cell SPF, elastomeric top coat, 20-year renewable warranty
The homeowner called us after two other contractors recommended a full tear-off. We got on the roof the same day — that's our standard — and found the existing substrate was still solid. No tear-off needed.
We applied two inches of closed-cell SPF foam across the entire field, flashed every penetration and parapet wall, then rolled on a reflective elastomeric top coat rated at 0.87 solar reflectance. Crew of four, two days on site.
Outcome: The homeowner's APS cooling bills dropped 18% the first full summer post-install — roughly $340 saved June through September alone. No leaks through the 2025 monsoon season. The roof is now eligible for a 20-year renewable coating warranty as long as it's recoated on schedule.
License #ROC-284731 was on the permit pulled with the City of Scottsdale before we touched a single seam. That's not optional — it's how we work.
Foam Roofing FAQs
Your Foam Roofing Questions Answered
We know foam roofing can raise a lot of questions. Here are the answers we give our customers in Arcadia, McCormick Ranch, and across the Valley. If you don't see your question, just call (602) 533-0488.
How long does a foam roof last in Phoenix?
With proper maintenance and a quality coating system, spray polyurethane foam (SPF) roofs we install typically last 20–30 years in the Phoenix climate. We use GAF EnergyGuard and CertainTeed SPF systems that are backed by manufacturer warranties.
Is foam roofing more energy efficient than tile or shingles?
Yes. The seamless foam layer provides continuous insulation—our Scottsdale customers often see a 15–20% drop in cooling costs during summer. In a Dobson Ranch home we recorded an 18% reduction after coating their existing foam roof.
Can I install foam roofing myself to save money?
We strongly advise against DIY foam roofing. It requires specialized equipment, precise mixing ratios, and safety training to handle isocyanates. A botched DIY job can lead to adhesion failure, blisters, and leaks that cost more to fix than a professional install. We offer free estimates, so let’s talk about your project.
How much does foam roofing cost in Phoenix?
Cost varies by roof size, existing condition, and coating type. Typical residential SPF systems run $4–$8 per square foot installed. We always provide a detailed line-item quote—no surprises. Call (602) 533-0488 for a same-day estimate.
What is the foam roofing process from start to finish?
First, we inspect your roof and prepare the surface (clean, repair, prime). Then we spray the polyurethane foam in layers, trim it to slope for drainage, and apply a UV-resistant protective coating. The job usually takes 1–3 days for an average home. We handle all cleanup and dumpster removal.
Do you offer warranties on foam roofing?
Absolutely. We provide a 10-year workmanship warranty on all foam installations, plus the manufacturer’s material warranty (up to 20 years for CertainTeed’s SPF system). As a GAF Certified Installer and CertainTeed SELECT ShingleMaster, we stand behind our work. Our license #ROC-284731 is on every contract.
Get Your Free Foam Roof Estimate Today
We've installed foam roofing on homes from Arcadia to McCormick Ranch — and we'll give you a same-day inspection, honest numbers, and no pressure. Call (602) 533-0488 or request a quote online.
Arizona #ROC-284731 · Fully insured · 4.9 stars across 340+ Google reviews · Serving the Valley since 2016